Luxury 33" x 20" compression-molded SOLID fireclay workstation apron-front kitchen sink. 50/50 double bowl, modern design with 1/2" radius interior corners, straight sidewalls, belted front apron, 1" material thickness, and glossy glaze. Topside accessories include a roll-out drying mat and slotted bamboo cutting board. Elegant antique copper "linear" (pattern), basket strainer-drain, and disposal flange basin accessories finish out the package.
EXTERIOR: 33”W x 20”L x 10”H
INTERIOR: 31”W x 18”L x 8-3/4”D
Over the last five years, Fossil Blu’s 33-inch-class fireclay sinks have grown in popularity to become the top selling sink size in our line. Large, functional, and beautiful, this sink not only makes a statement, but serves to benefit busy households. It can easily fit an entire 8-piece set of tableware after dinner is done, making this the choice of designers and homeowners alike. It is designed to fit atop 33” and 36” sink base cabinets, which are standard for medium-to-large kitchens, saving you time and money during installation. See specification sheet (below) for spec data and dimensional line art. As a natural product, minor variances in dimensions may occur. QA tolerances are held at +/- 2%.
SINK MATERIAL: Fine & ultra-fine fireclay
MANUFACTURING: Compression-molded, low-fired
Fossil Blu fireclay farmhouse sinks feature authentic SOLID fine and ultra-fine fireclay. Authentic fireclay is a semi-rare natural white clay containing higher concentrations of fine-grained quartz (silica) than typical ceramic (kaolin) clays. When the silica-based glaze is applied (learn more about our glaze below) and then fired at extremely high temperatures, the silica of both the quartz and glaze fuse together, creating a single structure. This “single structure” is what separates fireclay from typical/inexpensive ceramic products, which are fired at lower temperatures, exhibit little fusing, and are thin and/or hollow structures. This is also why genuine fireclay sinks, such as Fossil Blu, are more expensive than inauthentic “fireclay” sinks found in the marketplace.
We source our fireclay base material from mines following reduced-input/output (more sustainable) mining practices across Europe and Asia. Once at our factory, the clay is mixed with just water, then compression molded via a 50,000-pound hydraulic press. This high-pressure process not only forms the sink, but removes any trapped air, resulting in a solid structure that will not bubble during kilning. The sink is then low-fired (mild heat) for two days to dry before heading to the glazing room for finishing.
FINISH DETAILS: Ultra-thick, silica-based glaze
COLOR: Appliance White
SHEEN: Glossy
APPLICATION: Robotically applied, high-fired
This sink features Fossil Blu’s legendary silica-based glaze, which is robotically applied, allowing for up to twice the glaze thickness compared to hand-sprayed glazing techniques. Fired (kilned) at over 2200-degrees Fahrenheit, the glaze fuses with the fireclay substrate to create a permanent enamel. This high-gloss enamel has a very high hardness rating, which means it is non-porous and nearly indestructible. Standard household cleaners and mild abrasives (including bleach and Bar-Keeper’s Friend) are safe to use in moderation. Our white finish is similar to Appliance White (sometimes called Smoke White). RGB value averages are as follows: R: 235, G: 235, B: 237. The consistent RGB values of our finish means the white color has neither a warm nor cool tint. The high RGB values means the white is near perfect white (RGB each at 255).
SINK FRONT: Belted
APRON DIMENSIONS: 33" x 10"
APRON THICKNESS: 1”
APRON WRAP: Full length, left & right sides
CORNER RADIUS: 1/2” left & right, 1/4” top & bottom
Turn-of-the-century farm sinks nearly always included a design on the front apron. The most common of which was a vertically grooved (fluted) imprint. Today, as the “Modern Farmhouse” trend has taken storm, the majority of new farmhouse sinks sold feature a simple, flat-front, modern apron. However, for those seeking something more, Fossil Blu’s 2” cap-stone style belted sink offers a stately touch to an otherwise flat-front apron. The design is crisp, yet features soft edges and a supple appearance to the front, characteristic of the natural fireclay material underneath. At 1-1/8” thickness, the apron presents as a bold, sophisticated sink and, much like shaker cabinet fronts, is a good fit in a variety of classic stylistic themes. The left and right sides of the sink are fully finished, allowing for any install depth. We generally recommend 1-1/2” to 2” of the sink to be exposed on the left and right sides.
TOP:
DRYING RACK: Custom-fitted, slotted-design, constructed of bamboo
CUTTING BOARD: Non-toxic, steel-reinforced rubberized silicone, roll-out/up, black
BOTTOM (BASIN):
ACCESSORY MATERIAL: 304 Stainless Steel
ACCESSORY FINISH: Antique Copper
GRID INCLUDED: Linear pattern, custom-fitted
DRAIN INCLUDED: 3.5” basket strainer drain and assembly
DISPOSAL FLANGE INCLUDED: 3.5” disposal flange and stopper
Included with this sink are five accessories: One (1) Bamboo cutting board, one (1) silicone dish drying rack, two (2) custom-fitted sink grids, one (1) basket strainer drain, and one (1) garbage-disposal flange.
The top accessories expand the usable space in your kitchen and feature the neutral tones of natural bamboo and matte black. The drying racks rolls out for use, and rolls up into a roughly 3" tube for easy storage. Bamboo is chosen for its natural fibrous strength and minimally-porous nature.
The bottom (basin) accessories feature the material stength of stainless steel, electro-plated in antique copper, for a distinct design motif and professional appearance.
These accessories are provided for your peace of mind. The drying rack, cutting board and basin grid are easily removable. The basket strainer drain is provided for those not installing a garbage disposal, while the disposal flange is provided for those who are installing a disposal.
NUMBER OF BASINS: 2
BASIN DIVIDE: 3/4 Height
NUMBER OF DRAINS HOLES: 2
DRAIN HOLE LOCATION: Center
DRAINAGE SLOPE: 4°
INTERIOR CORNER RADIUS: 1/2””
If organization in the kitchen is a top priority, then a double bowl sink is your best choice. By dividing the sink in two, one side can hold dirty dishes while the other side remains clear. This can be especially useful while cooking, when you may need to fill a pot, or otherwise use the faucet. Additionally, for those wishing to conserve water, a soapy side and rinse side is made possible by our double bowl sinks. With straight walls, and tight ½” radius corners, these sinks make the most of their size, offering a best-in-class sink surface area.
Fossil Blu is a family-owned, American company with operations and CUSTOMER SERVICE based in the U.S. Our products are designed here and manufactured by generational artisans overseas. We’re proud of our reputation as a quality, customer-centric company which provides best-in-class products for the North American market. From our family to yours, thank you for considering Fossil Blu.
